Will you have the Best Little Woodshed in town?
Need a summer project? Now is the best time to buy and store your firewood, so that you have dry, efficient-burning wood for next winter.
How to keep warm
Modern wood burners need dry wood to burn efficiently. Even slightly damp wood can burn inefficiently, wasting fuel and giving off less heat. Making sure you have plenty of dry wood at the beginning of winter is key to getting good heat from your burner.
Buy now from a Good Wood supplier, and stack and cover so it is dry and ready to burn when you need it.
How to stack your wood
- Stack firewood loosely enough so that air can blow through it.
- Secure your stack, as wood pieces will shrink and shift as they dry.
- Split your wood – smaller pieces dry faster.
- Soft woods like Pine, Fir and Macrocarpa normally take 6 – 12 months to dry.
- Hard woods like Gum and Manuka can take 18+ months to dry.
- Firewood needs to have less than 25% moisture content to burn efficiently.
How to keep your wood pile dry
- Use a tarpaulin, corrugated iron, or any kind of water proof cover over the top of the wood, but make sure it is tied down so it doesn't blow off.
- Allow air flow to the sides, so that moisture can escape.
- Keep the wood off the ground using bricks, wood slats or pallets to prevent damp seeping up, and allow air flow under the wood.
How to build a shed
You can build a shed without a Building Consent if it is:
- Less than 10m2 in floor area.
- One storey high – floor max 1 metre above ground, max height of shed 3.5 metres above floor level.
- Not positioned closer than the sheds own height to a boundary or any residential building.
If you're unsure, contact Council's Building Control Officer on 03 265 6983 or email email@example.com.
For further information about firewood or wood burners contact Environmental Programmes Adviser Richard Popenhagen on 03 546 0251.